Stainless steel ASTM A276 / ASME SA276 303 Bars, SS 304 Bars, Steel 304L Round Bars, Stainless 304H Rods, SS 310 Bars, 310S Flat Bars, SS 316 Hex Bars, Steel 316L Round Bars, 316H Bars, Steel 316Ti Forged Bars, 317L Bright Bars, SS 321 Rods, Stainless Steel 321H Black Bar, Steel 347 Polished Bars, SS 410 Rods, SS 416 Bars, Steel 420 Round rods, SS 430F Bars, Stainless 440C Bars, Steel 446 round Bars, SS Hexagonal Bar, Steel Hot Rolled Bar, Stainless Steel Triangle Bar, 17ph Stainless Bar, 15 5ph Steel Bar.
Kalikund Steel & Engg. Co. are Supplier and Exporter of ASTM A276 / ASME SA276 Stainless Steel 303 (UNS S30300) Bars, Stainless 304 (UNS S30400) Round Bars, Steel 303 Bars (UNS S30300), SS 304 (UNS S30400) Forged Bars, Stainless Steel 304L (UNS S30403) Rods, Steel 304H (UNS S30409) Round Rods, Stainless Steel 310 (UNS S31000) Hex Bars, Steel 310S (UNS S31008) Black Bars, Stainless 316 (UNS S31600) Round Bars, Steel 316L (UNS S31603) Round Rods, Stainless Steel 316H (UNS S31609) Bright Bars, Steel 316Ti (UNS S31635) Polish Bars, SS 317L (UNS S31703) Square Bars, Stainless 321 (UNS S32100) Rods, SS 321H (UNS S32109) Bars, Stainless Steel 347 (UNS S34700) Bars, Stainless 410 (UNS S41000) Round Bars, SS 416 (UNS S41600) Forged Bars, Steel 420 (UNS S42000) Hex Bars, Stainless Steel 430F (UNS S43020) Bright Bars, Stainless Steel 440C (UNS S44004) Bars, Stainless Steel 446 (UNS S44600) Round Bars in India.
Cost always has been a challenging task for any metallurgical industry since it is governed by the many fixed and variable factors. Sustainability of cost component in induction Furnace will depend on:
Raw Material input cost
Raw Material Mix
Tap-to-Tap time.
Process sequence.
Refectory performance.
Firstly, raw material cost factor depends on selection of raw material like scrap or virgin type, its availability in the market and their Price will decide the cost of final product. Also, one of the best practices in induction melting of stainless steel suggest that the required raw materials such as low carbon steel or stainless steel scrap, Ferro – Molybdenum, Nickel, Low carbon Ferro – Chromium, Ferro – Silicon, and Manganese etc. are estimated in such a way that the final composition is achieved without much refining.
Secondly, process sequence steps such as optimum Tap – to – tap time also decide the cost of production and its yield.
From the above it is the fact that the product viability of the induction furnace industry is possible only if some cost reduction takes place in the existing.
A Argon oxygen decarburization (AOD) is a process primarily used in stainless steel making and other high grade alloys with oxidizable elements such as chromium and aluminum. After initial melting the metal is then transferred to an AOD vessel where it will be subjected to three steps of refining; decarburization, reduction, and desulphurization
Modified processes in the form of argon oxygen de – carburizing (AOD), Vacuum Oxygen de - carburizing (VOD) being followed for production of stainless steel in some industries which is cheaper and also have high rate of production. the ingots are processed further to mill products ranging from bars, flats, rings, sheets wires, tubes and foils.
A
| GRADE | GRADE | |||||||
| 304 | 316 | 304 | 316 | |||||
| RATE | RATE | RATE | RATE | |||||
| BLACK BAR | 16MM - 22MM | 136 | 165 | BLACK BAR | 16MM - 22MM | 147 | 177 | |
| 25MM - 32MM | 128 | 158 | 25MM - 32MM | 140 | 170 | |||
| 36MM - 118MM | 123 | 153 | 36MM - 118MM | 137 | 167 | |||
| BRIGHT BAR | 16MM - 22MM | 151 | 181 | BRIGHT BAR | 16MM - 22MM | 157 | 187 | |
| 25MM - 32MM | 141 | 175 | 25MM - 32MM | 150 | 180 | |||
| 36MM - 75MM | 138 | 171 | 36MM - 75MM | 147 | 177 | |||
| CHEMICALLY OK | ||||||||
| ULTRA OK | ||||||||
| RATES OF OTHER SIZES & GRADES ON ENQUIRY | ||||||||